1/12 JAMMIN CRT .5 PRO

Ofna Jammin' CRT.5 Pro Mini Truggy Kit.
Now includes the extended chassis allowing full size servos to be used
for both steering and throttle and improves the model's handling.

FEATURES: Chassis: CNC machined hard coated 7075 aluminum .12" (3mmm) thick
Drive: Four wheel shaft drive
Fuel Tank: 2.53oz (75cc)
Transmission: Single speed
Exhaust: Polished tuned pipe and round port manifold
Ball Bearings: Full set, rubber sealed
Shocks: Four oil filled 13mm big bore with 3.5mm shaft
Shock towers: 4mm thick CNC machined aluminum shock towers
Main Gear: 46 tooth, steel construction
Clutch Bell: 13 tooth, steel construction with twin 5x10mm bearings
Gearboxes: Sealed front and rear
Universals: Hardened steel alloy
Differentials: Oil filled bevel gear type
Brakes: Front and rear disc with center brake cams for superior
braking and brake bias adjustability
Clutch: Three shoe
Engine Mounts: Adjustable hard anodized aluminum with cooling fins
Wheels: Jammin' Neon Yellow 2.2" dish wheels with 12mm hex wheel hub
Tires: Proline Bowtie 2.2" Buggy square pins with foam inserts
Suspension: Four wheel independent with adjustable camber and
t-bolt kingpin front knuckle design
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of
the tops of the tires from vertical when viewed from front
or behind vehicle
Steering: Bellcrank steering with spring loaded servo saver
Body: Clear polycarbonate Jammin' Truggy body
Wing: Plastic construction, adjustable
Bonus: Four Proline neon yellow dished 2.2" wheels
The vehicles comes 80% built out of the box. You
still need to build the shocks, install your engine,
your radio equipment and paint the body.

INCLUDES: Ofna Jammin' CRT.5 Pro truggy kit with tires, wheels, aluminum
shocks, clear body, wing, 46t steel spur gear, 13t clutch bell,
manifold, pipe, adjustable turnbuckles, tank, steel brake disc,
Jammin wheels, Proline wheels, decals, graphite radio tray and
illustrated manual

REQUIRES: Radio: 2-Channel with 2 Servos
Radio Batteries: (12) AA size
Engine: .12 w/rear exhaust and pilot (SG) shaft
Glow Starter: 1.2 volt - DTXP3000
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment

SPECS: Length: 14" (356mm)
Width: 11" (279mm)
Weight: 4lbs (1814 grams)
Wheelbase: 8.8" (225mm)

COMMENTS: You can remove the wheel hub and use 2.2" buggy (pin mount)
rear wheels (for the front and rear). This is how the bonus
Proline wheels mount to the truck.

Ofna Racing Division . OFN

Customer Reviews

This product has not yet been reviewed.

Write a Review

Please login or register to write a review for this product.