3PMX 2.4G FASST TX/R603FF RX

FUTK2021

This is the Futaba 3-Channel 3PMX Computer Radio with the 2.4GHz FASST System. Transmitter and receiver only, servos not included. The 3PMX is also capable of using the receiver to give modelers special Dual Antenna Diversity (DAD). The 3PMX adds three new features; Four Wheel Steering Mixing, Digital Trim Step and Adjuster for Crawlers, Monster Trucks and any four wheel drive vehicle. These features allow drivers to apply mixing between steering, throttle and channel 3.
FEATURES:

FASST (Futaba Advanced Spread Spectrum Technology) sends twice as much information to the receiver at eight times the resolution of standard systems for unsurpassed control and smooth servo travel

2.4GHz circuitry is wired directly into transmitter eliminating separate plug-in modules

"Auto Detect" instantly determines whether HRS or PPM mode is active in the receiver (R603FS only)

Special ID code prevents signal interruption by rejecting unwanted signals
Brake mixing for large cars
Anti-skid braking system (ABS)
Throttle Acceleration (ACC) minimizes time lag before clutch and brakes are connected in gasoline engine cars

Steering speed adjusts steering servo operating speed

Racing timer
Function select lever function
In addition to great performance in R/C car and truck applications, this system is also ideally suited to the rigors of boat racing

10 Model Memory
One year limited warranty through manufacturer
INCLUDES:

2.4GHz FASST Futaba 3-Channel 3PMX transmitter

2.4GHz FASST Futaba 3-Channel Receiver

ON/OFF switch harness
Instruction manual
REQUIRES:

AA Batteries: Eight for transmitter Servos of modeler's choice
SPECS:

Transmitter;
Current Drain: 250mA or less Transmitting Antenna: 2.4GHz
Receiver;
Reception Antenna: External Power Requirement: 6V NiCd battery Size: 1.5 x 1 x 0.55" (39 x 26 x 14mm) Weight 0.45oz (12.8g)