4EXA FM COMP R168DF 4S3004 **A

FUTK40**

This is the Futaba 4EXA 4-Channel Computerized FM Airplane Radio System.
with 4 S3004 standard size, ball bearing Servos
and the R168DF standard size Receiver.
***This Radio does not have PCM Capabilities***
***THIS RADIO CONTAINS NO HELI PROGRAMMING***

FEATURES: Four model memory
Exponential for ailerons, elevator and rudder
Wing mixing function for V-tail and elevons
40-segment LCD screen
Servo reversing
Analog trims with trim memory
End Point Adjustment (EPA) on all 4 channels
Data reset
Trainer system
Low battery alarm
Trainer box capable (trainer cord sold separately, see COMMENTS).
One year limited warranty

INCLUDES: Futaba 4EXA Transmitter with transmitter and receiver crystals
R168DF Receiver
Receiver NiCd Battery: FUTM1295
Transmitter Battery: FUTM1440
Charger: FUTM1830
Four S3004 Servos: FUTM0004
One Bag Servo Mounting Hardware: FUTM3551
SWH-13 Switch Harness: FUTM4370
ANT-5 Transmitter Antenna: FUTM5040
Transmitter strap: FUTM5690
Servo Extension: FUTM3910
Servo Tray
Freq Flag

REQUIRES: Installing servos and receiver and charging batteries

SPECS: 4EX Transmitter
Modulation: FM (Frequency Modulation)
Power Supply: 9.6V NT8S600B NiCd battery or 12V alkaline battery
Current Drain: 250mA

S3004 Servos (4)
Speed: .23 sec/60° @ 4.8V
.19 sec/60° @ 6V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V
57 oz-in (4.1 kg-cm) at 6V
Length: 1.6" (41mm)
Width: .8" (20mm)
Height: 1.4" (36mm)
Weight: 1.3 ounce (37.2 grams)
Connector: "J" type with approx. 5" wire

R168DF Receiver
Narrow Band: 20kHz
Intermediate Frequency- 1st IF: 10.7MHz
Power Requirements: 4.8 to 6V (shared with servos)
Current Drain: 10mA
Dimensions: 1.1 x 2.2 x .8" (28.5 x 55.5 x 19.8mm)
Weight: 1.0oz (28g)

COMMENTS: If using as a trainer radio, one of the following trainer cords will
be needed;
9C to FM-FUTM4420 trainer cord to connect to standard trainer port
9C to 9C-FUTM4415 trainer cord when using a 9C or another 4EXA