8FGHS SUPER 2.4G R6208SB MD 2

FUTK8011

This is the Futaba 8FGHS Super 2.4GHz 14-Channel Radio System with the Receiver and No Servos.This is the helicopter version which will default to heli settings when powered up and has a smooth throttle stick. This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard
FEATURES:

Ideal for flybarless helis and all other heli applications

New software with menus that support 3-axis gyros and that are tailored to Futaba's super-fast gyro

VPP (Variable Pitch Propeller) compatibility can be set to three conditions for throttle and pitch curve

Swash trim can be adjusted from swash screen

Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
Fourteen total transmitter channels, 12 proportional and 2 switched

20-model memory expandable to unlimited model setups and downloads online software updates with a 32MG - 2GB SD memory card (memory card not included, must be purchased separately)

Receiver accepts a wide range of batteries, from 4-cell NiCd and NiMH packs to 2S LiFe and LiPo packs with no regulator required

Receiver is capable of controlling up to eight channels using the outputs for a conventional system and up to eighteen channels including the two digital channels by using the output for the S.BUS system, receiver also has a high-speed mode that delivers ultra fast frame rates on channels 1-6

SensorTouch programming
Factory defined mixes
Stick calibration menus
Trainer system (must purchase Trainer Cord
One year limited warranty through Hobby Services beginning at date of purchase
INCLUDES:

8FGHS Transmitter R6208SB Receiver HT6F1700B 1700mAh NiMH Transmitter Battery
HBC-2B(4) Battery Charger Switch Harness Neck Strap Instruction Manual
REQUIRES:

Servos such as the Futaba S9252, S9255, S3151 and S3001

Receiver battery, size and mAh rating dependent on aircraft and number of servos used
SPECS:

Transmitter;
Transmitting Frequency: 2.4GHz band
Modulation: 2.4GHz 7ch or 2.4G multi-channel switchable

Power Supply: 7.2V NiMH Battery
Receiver;

Power Requirement: 3.7 - 7.4V battery or regulated output from ESC*

Size: 0.98 x 1.86 x 0.56" (24.9 x 47.3 x 14.3mm)

Weight: 0.49oz (13.8g)
*When using ESCs make sure that the regulated output capacity meets your usage application