ACCU-CYCLE ELITE BATT CYCLER.

HCAP0280

This is the Hobbico AC/DC Accu-Cycle Elite Battery Cycler. Charges, Discharges and Cycles NiCd, NiMH and Lithium-based battery packs. Perfect for radio batteries, Lithium Park Flyer batteries, plus single cell glow starter cells.
FEATURES:

Charges and Discharges 1-3 cell Lithium-Ion and Lithium Polymer packs

For LiPo packs that are wired for balancing a LiPo Cell Balancer such as Great Planes' ElectriFly Equinox is compatible with the Accu Cycle Elite Peak Charges, Discharges and Cycles 1-10 cell NiCd or NiMH packs
Charges two batteries at once
Auto Smart Set automatically calculates safety time-out, Charge Rate,TRICKLE Rate and Discharge Voltage cut-off based on battery type, capacity, and voltage
Custom Charging and Discharging routines can be created for up to 10 packs and stored in memory

Prevents overcharging with Peak Detection for NiCd and NiMH packs and CC/CV detection for Lithium-based packs
On-screen messages appear on large easy to see two line 16-character LCD screen, messages feature less abbreviations, better explanations and units of measurement with every number AC/DC compatible for at home or on the field recharging

Optional Temperature Sensor functions w/ all battery types

Two Temperature Sensor ports
Two year warranty
INCLUDES:

One Accu-Cycle Elite cycler
One AC adapter/power supply (NOT AVAILABLE SEPARATELY)

Two (Red & Black) alligator clips w/banana jacks

One instruction booklet
One Main/Memory menu sheet
One NiCd, NiMH, and Lithium menu sheet
One Charge/Discharge chart w/blank memory chart
REQUIRES:

If needed, a 12V DC source
temperature sensor is needed
Connectors to go from the charger to the battery or radio:
FUTABA J Tx/Rx LEADS ALL RADIOS EXCEPT 9VAP
FUTABA J Tx/Rx LEADS 9VAP ONLY JR Tx/Rx LEADS HITEC Tx/Rx LEADS CHARGE LEADS, BANANA PLUGS TO ALLIGATOR CLIPS
Tx BATTERY WITH 9V CONNECTOR, FUTABA J Rx CHARGE LEAD
BANANA PLUGS ONLY (3 PAIR)
SPECS:

Input Voltage: 11-14.5V DC AC Power Supply: 110V AC 60Hz input, 14.5V DC 2.5A output
Number of Output Ports: two
For BOTH Outputs:
Battery Types: Nickel-Cadmium (NiCd), Nickel-Metal Hydride (NiMH)
Lithium Polymer (LiPo), Lithium-Ion (Li-Ion) Number Cells:
1-10 NiCd or NiMH (1.2-12V)
1-3 LiPo or Li-Ion (3.6-11.1V)
Fast Charge Current: * 50-2000mA Fast Charge Termination: NiCd/MH -"negative deltaV'" Peak Detection,
LiPo -"Constant-Current/Constant-Voltage" (4.2V/cell max.)
Li-Ion -"Constant-Current/Constant-Voltage" (4.lV/cell max.)
Peak Detection Sensitivity: 3-15mV per cell adjustable
Fast Chg Safety Timer: automatically calculated
TRICKLE Charge Current: * 0-200mA Peak Detection Delay: 3 minutes Discharge Current: 50-2000mA Discharge Cutoff Voltage: 0.8-1.2V per cell adjustable for NiCd & NiMH 3.7V per cell fixed for Li-Ion and LiPo
Cycle Count: 1 to 5 (NiCd and NiMH only) Cycle Delay- Chg/Dsch: 10 minutes Status Indicators: two tri -color LEDs (Red/Amber/Green)
Optional Temp. Cutoff: 60-130°F (15-54°C) Output Connectors: banana jacks Battery Memories: ten Display Type: 2-line, 16 character LCD Case Size: 3.7 x 6.1 x 1.2 in (94 x 30.5 x 155mm)
Weight: 13.23oz (375g, not including Power Supply)
Length: 6.1" (155mm)
Width: 3.7" (94mm) Height: 1.2" (30.5mm)

* Auto Smart Set Feature, can be manually overridden except for Fast Charge safety timer
** Requires optional Temperature Sensor
COMMENTS:

To achieve Elite's maximum potential when using a DC input the power source must be capable of delivering at least 5A of current
while maintaining 12V DC