BAJA 5B V2.0 RT GRY HPI103859 Features:
Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gunmetal anodized, constructed of aircraft grade 6061 T6 aluminum, nylon plastic skid plates front and rear
Drive: Rear wheel gear drive
Engine: 2 cycle 1.40 cu in (23cc) gasoline with pull starter, updated cylinder that provides 10% more power than original version dual element foam air filter, primer, choke and kill switch. Now equipped with Torx T27 screws for less wear on tools and screws
Exhaust: Steel High Flow design with much larger capacity than original Radio: 2.4GHz Spread Spectrum DSSS with failsafe function that prevents low voltage runaways, steering dual rate, servo reversing switches and flashing LED low battery warning
Servos: Water resistant with high torque 25kg-cm steering servo
Radio Box: Sealed, rubber plugs provide access, no need to unscrew entire box
Receiver Battery: 2000mAh, five sub C-cells 6V rechargeable pack with standard connector
Clutch: Automatic centrifugal type, 8000 RPM for quick acceleration
Fuel Tank: 24oz (700cc)
Ball Bearings: Full set included
Shocks: Four VVC/HD oil-filled, aluminum body, five externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces
Main Gear: 57 tooth
Gearbox: Sealed
Differentials: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears
Brakes: Ventilated dual disc
Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide 6.7" (170mm) outer diameter
Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm) wide, 6.7" (170mm) outer diameter
Wheels: 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue
Body: 0.08" (2mm) thick polycarbonate pre-painted with decals applied
Rear Wing: Adjustable, molded black plastic with decals applied
Roll Cage: Baja style high impact nylon protects engine and body from crash damage
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shim 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer beginning at date of purchase
Includes:
HPI Baja 5B 2.0 RTR Buggy
1.40 cu in (23cc) Gasoline Engine
2.4GHz Radio
2 Water Resistant Servos
6V RX Pack
3.4oz (100cc) 2-Cycle Oil
2oz (60cc) Shock Oil
1oz (30cc) Diff Oil
1oz (30cc) Air Filter Oil
Tube of Gear Grease
Body with Wing
Extra Air Filter
Wrenches
Decal Sheet
Illustrated Instruction Manual
Specifications:
Vehicle
Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Ride Height: 3" (76mm)
Suspension Travel
Front 3.7" (95mm)
Rear 3.9" (100mm)
Weight: 21.3 lbs (9.6kg)(approx.)
Wheelbase: 22.4" (570mm)
Front Tread: 15.0" (382mm)
Rear Tread: 15.8" (402mm)
Front Track: 17.4" (442mm)
Rear Track: 18.1" (460mm)
Gear Ratio: 8.382:1
Tires
Front: 2.4" (60mm) x 6.7" (170mm)
Rear: 3.1" (80mm) x 6.7" (170mm)
Body
Length: 22.9" (581mm)
Width: 8.8" (224mm)
Height: 4.75" (121mm)
Requirements:
Transmitter: 8 AA Batteries (Not Included)
Unleaded Gasoline: 87-93 octane, mix gasoline and oil at 25:1 ratio
Screwdriver: Flat blade, 3/16" (4-5mm) wide Hobby Products Intl. . HPI Tell A Friend |
| |
Customer Reviews
This product has not yet been reviewed.
Write a Review
Please login or register to write a review for this product.
|
Home | About Us | Contact Us | Policies | Shipping | Frequency Chart |