CAP580 CHAPMAN PROFILE ELEC 3-

GPMA1112

This is a radio controlled, electric powered, foam
Great Planes FlatOuts Matt Chapman CAP 580 3D Profile Park Flyer Airplane.
For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: 1/8" (3mm) thick foam with carbon fiber reinforcing
rods to strengthen the infrastructure
Trim: Yellow with Blue, Orange, Green and Purple splatter marks
Wings: 1/8" (3mm) thick foam with with carbon fiber leading edge
and trailing edge reinforcement
Landing gear: Carbon fiber rods and composite axle supports
Wheel Pants: 1/4" (6mm) thick White foam construction
Building Time: Flight ready in 2-3 hours
Hardware: Carbon fiber pushrods and wing struts, clip-hinge system
on tail section allows up to 80° of deflection without binding and
also pops loose in the event of a crash
Motor: T-370 size Brushed
Gearbox: 5:1 gear ratio, ball bearing-supported
Propeller: 10x3.8 Slo-Flyer with prop saver
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Cap 580 foam construction 3D airplane, 370 size motor, 5:1 gearbox,
10x3.8 Slo-Flyer prop, prop saver, carbon fiber rods and tubes,
complete hardware package and photo-illustrated manual

REQUIRES: Speed Control: 7+A continuous current
Battery: 3S 350-700mAh Lithium Polymer (LiPo) battery
**For optimum performance battery weight should not exceed
2.3oz (65g).**
Charger: Lithium Polymer capable
Radio: 4-channel
Receiver: Ultra micro size
Servos: 3 micro with a 15+ oz-in minimum torque rating
Misc. Items: Foam-safe CA, building and field equipment

SPECS: Wingspan: 36" (915mm)
Wing Area: 222 sq in (14 sq dm)
Weight: 7.5 - 9oz (215 - 225g)
Wing Loading: 4.9-5.8oz/sq ft (15-18g/sq dm)
Length: 30.5" (770mm)
Airfoil: Flat plate
Center of Gravity: 2.25" (57mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws:
Function High rate endpoints High rate travel High rate exponential
Aileron +/- 100% +/- 55-60° 40%
Elevator +/- 100% +/- 55-60° 40%
Rudder +/- 100% +/- 55-60° 40%
Low rate endpoints Low rate travel Low rate exponential
Aileron +/- 40% +/- 15-25° 0%
Elevator +/- 40% +/- 15-25° 0%
Rudder +/- 40% +/- 15-25° 0%

Only one ultra micro receiver is required depending on the channel of
the radio selected (Low band Ch 11-35, High band Ch 36-60). Please
note the Accessory Completion Guide lists both Low and High band
receivers. Channel selection is left to the modeler's preference.