CESSNA 195 -RED

AEWCESSNA195RED

This is the radio controlled, gasoline or glow powered, almost-ready-to-fly
Cessna 195 QB (Quick Build) Scale Airplane
in Red Color Scheme from Aeroworks.

FEATURES: Construction: Laser cut, CAD design jig built balsa and ply, plastic
cockpit with seats and dash
Wings: Two-piece balsa and ply construction with carbon wing tube
Aileron Control: Dual servo
Rudder Control: Single servo pull-pull design
Engine Mounts: For 2-stroke engines, two-piece composite construction with wooden standoffs, for gasoline engines, prebuilt plywood with aluminum standoffs
Cowl: Painted fiberglass
Navigation Lights: Preinstalled in wings and fuselage
Covering: Ultracote
Canopy and Windows: Clear, pre-mounted
Landing Gear: Painted 0.16"(4mm) thick aluminum, steerable tailwheel 4" (100mm) diameter foam main wheels
Spinner: 2.25" (57mm) polished aluminum
Fuel Tank: 25oz (750cc) for gasoline
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 12-15 hours
Warranty: Aeroworks manufacturing guarantees this kit to be free from defects in both material and workmanship at the date of purchase.
This limited warranty does not cover any component parts damaged by use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, fuel tank, landing gear, wheels, wing tube, wing tube, instruction manual, navigation lights with wiring, throw
meter, CG buddy and plastic cockpit

REQUIRES: Radio: 10-channel minimum with 8-ch receiver, 2.4GHz recommended
Aileron Servos: Two w/at least 140 oz/in torque @ 6V
Rudder Servo: One w/at least 180 oz/in torque @ 6V
Flap Servos: Two w/at least 140 oz/in torque @ 6V
Elevator Servos: One with at least 180 oz/in torque @ 6V all servos listed above must be digital with metal gears
Throttle Servo: One standard size and torque 6" (152mm) Heavy Duty Servo Extensions: Two 18" (457mm) Heavy Duty Servo Extensions: Four 24" (610mm) Heavy Duty Servo Extensions: Two
Receiver Battery: 6V 1700mAh minimum
ignition Battery: 4.8V 1700mAh (if using gas engine)
Two switches with charge jacks (receiver, ignition for gas engine)
Navigation Light Battery: 4.8V, 1700mAh
Engine: 1.60 - 1.80cu in (26 - 29cc) glow OR 1.80 cu in (30 cc) gasoline
Muffler: Pitts type recommended
Propeller, building and field equipment