|
13 products in this category, displaying products 1 to 13.
Alumilite Corp . ALU
 |
5 MIN PUTTY 1 LB (PURP/WHITE)
Extremely quick, easy, and safe to use putty allows you to make a mold in less than 10 minutes. Complies with FDA standards. 20A hardness. Open Time: 2 minutes/Demold Time: 8-12 minutes.
Out of Stock. Contact Us for Availability. |
$24.99 |
|
 |
5 MINUTE PUTTY 2 POUND
Extremely quick, easy, and safe to use putty allows you to make a mold in less than 10 minutes. Complies with FDA standards. 20A hardness. Open Time: 2 minutes/Demold Time: 8-12 minutes.
In Stock |
$49.99 |
|
 |
AMAZING MOLD PUTTY KT 3LB
In Stock |
$44.99 |
|
 |
FLEX 80 CASTING RUBBER-AB28K
Flex 80 provides users with an extremely tough flexible urethane rubber excellent for duplicating/casting hard rubber parts or for making hard urethane rubber molds. It is extremely easy to use. The easy to use system does require vacuum or pressure ...
In Stock |
$34.99 |
|
|
MOLD PUTTY 1 POUND
In Stock |
$19.99 |
|
 |
QUICK SET RUBBER - 1LB
Extremely easy to use, general purpose rubber with a medium hardness, very thin, vacuum not required for most molds. Great for simple 1 and 2 piece molds. 45A hardness. Open Time: 1 hr./Demold Time: 8 hrs.
In Stock |
$25.99 |
|
 |
QUICK SET RUBBER 5 POUND
Extremely easy to use, general purpose rubber with a medium hardness, very thin, vacuum not required for most molds. Great for simple 1 and 2 piece molds. 45A hardness. Open Time: 1 hr./Demold Time: 8 hrs.
In Stock |
$115.99 |
|
 |
RTV RUBBER HSII
Very thin, easy to use rubber that cures to a soft, flexible, extremely tough silicone rubber. Highest tear strength rubber. 20A hardness. Open Time: 1.5 hrs./Demold Time: 18 hrs.
In Stock |
$24.99 |
|
 |
RTV RUBBER HSIII
Very thin, easy to use rubber that cures to an extremely soft, flexible, tough silicone rubber. Most flexible (softest) silicone rubber. 10A hardness Open Time: 2 hrs./Demold Time: 24 hrs.
Out of Stock. Contact Us for Availability. |
$21.99 |
|
|
WHITE FLEX 80 URETHANE RUBBER
Flex 80 provides users with an extremely tough flexible urethane rubber excellent for duplicating/casting hard rubber parts or for making hard urethane rubber molds. It is extremely easy to use. The easy to use system does require vacuum or pressure ...
Out of Stock. Contact Us for Availability. |
$39.99 |
|
Environmental Tech Inc. . ETI
Back to top
Home | About Us | Contact Us | Policies | Shipping | Frequency Chart |
