EDGE 540 3D EP PERF ARF

GPMA1550

ElectriFly Edge 540 3D Aerobatic Airplane.
This Edge 540 3D is part of the ElectriFly E-Performance Series.
For intermediate to experienced flyers 14 years of age and older.

FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and
airfoiled control surfaces, motor box preinstalled with blind nuts
providing perfect spacing for spinner backplate-no need for
measuring, cowl ring also preinstalled
Wings: Two piece with carbon fiber wing joiner and single screw
attachment
Motor Mount: Built-up plywood
Covering: Top Flite MonoKote
Aileron Control: Dual servo
Cowl: Prepainted fiberglass, attaches with rare earth magnets
Canopy: Clear, single
Wheel Pants: Prepainted ABS
Landing Gear: Prepainted aluminum 0.079" (2mm) thick
Wheels: Two foam 1.75" (44mm) diameter
Spinner: Red plastic, 1.75" (44mm) diameter
Hardware: Full set included
Building Time: Approximately 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.

INCLUDES: ElectriFly ARF Edge 540 3D Aerobatic Airplane with fiberglass cowl,
ABS wheel pants, landing gear, wheels, hardware, photo-illustrated
instruction manual and two decal sheets

REQUIRES: Radio: 4 channel
Servos: 4-micro
Dual Servo Extension: For aileron servos
6" (150mm) Slim Extension Wire: Two
16" (400mm) Servo Extension: Two
Motor: Rimfire 35-30-1250 outrunner
35A ESC for Brushless Motors:
Battery: LiPo 1500mAh 11.1V
Cell Balancer: For LiPo battery,
Battery Charger: LiPo compatible
Propeller: 10x7E

SPECS: Wingspan: 41" (1040mm)
Wing Area: 353 sq in (22.9 sq dm)
Weight: 29 - 32.0 oz (820 - 910g)
Airfoil: Fully symmetrical, mid wing placement
Wing Loading: 11.8 - 13.1 oz/sq ft (36 - 40 g/sq dm)
Length: 39.5" (1005mm)
Center of Gravity: 2-1/2" (64mm) back from the leading edge of the
wing at the side of the fuselage

Control Throws- Low Rate High Rate 3D
Elevator: 1/2" (13mm) 8° 1-1/8" (29mm) 19° 2-1/4" (57mm)40°
Rudder: 2" (51mm) 19° 2-3/4" (70mm) 27° 3-3/4" (94mm)39°
Ailerons: 5/8" (16mm) 11° 1-1/8" (29mm) 20° 1-3/4" (44mm)33°

COMMENTS: Following are the MonoKote colors used on this model and stock
numbers for six foot rolls;
Metallic Blue TOPQ0402 Missile Red TOPQ0201
Yellow TOPQ0203 White TOPQ0204