FUNJET KIT

MPUM214213

This is a Radio Controlled, Electric Powered, Elapor Particle
Foam Construction, Multiplex FunJet Kit.
This model features a rear mounted motor design.

FEATURES: Construction, Elapor foam, white in color
Wings: Elapor foam construction, white in color
Radio compartment: Elapor foam construction, white in color
Canopy: Elapor foam construction, white in color
Landing gear: None, model should be hand launched and belly landed
Hardware: Pushrods, hook and loop material, screw lock connectors,
and other miscellaneous hardware inlcuded
Motor Mount: Black plastic construction with adjustable motor thrust
lines
Elevon control
Fiberglass wing spar: 22.5" (571mm) long by .25" (6.35mm) diameter

INCLUDES: Foam fuselage; wing panels; turtle deck; canopy; and fins, two wire
pushrods (1mm (.039") diameter), fiberglass wing spar, plastic servo
fairings, motor mount, hardware kit, decals and illustrated assembly
instructions.

REQUIRES: Brushless Motor Power Pack - MPUG3213 (contains Motor, Speed Control
Prop and Hardware)
Battery - 3 cell 2100-3200mah LiPo pack - GPMP0520 (will require a
mating connector for the speed control - WSDM1302
Charger - MPUP9531 or GPMM3153
Radio: Minimum 3 channel with elevon mixing - FUTJ51**
Servos: 2 nano size servos for elevon control - FUTM0025
Servo Extension 12": 2 required - HCAM2100