GIANT U CAN DO 3D ARF

GPMA1271

glow or gasoline powered, Almost-Ready-to-Fly,
Great Planes Giant U-Can-Do 3D Aerobatic Airplane.
For Intermediate to Advanced Modeler/Fliers.
IMAA legal.

FEATURES: Construction: All balsa, plywood
Wings: Two piece all wood, with aluminum joiner tube
Covering: TopFlite MonoKote, color scheme is Jet White and Pink with
Sky Blue and Purple accents
Radio Compartment: Plywood reinforced, accessible under canopy
Cowling: Pre-painted, fiberglass
Wheel Pants: Pre-painted, fiberglass
Wheels: Two 4" (101.6mm) foam, one 1¼" (31mm) tailwheel.
Canopy: Single, clear
Landing Gear: Pre-formed aluminum .16" (4mm) thick with 3/16"x2"
Axles and a 1/8" (4mm) tailwheel wire
Aileron Control: Dual servo
Elevator Control: Dual servo
Flap Control: Dual servo
Engine Mount: Composite, adjustable
Building Time: Ready to fly in only 6-8 hours.
Warranty Period: Great Planes warrants this kit free from defects
in both material and workmanship at date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies,(7) 4-40
pushrod, 4" main wheels, 1¼" tailwheel, nylon adjustable e-mount,
24oz (710cc) fuel tank, 2¾" aluminum spinner, aluminum wing
joiner hardware package and photo-illustrated instructions.

REQUIRES: Engine: 1.20-1.60 cu in (20-26cc) 2 or 4-stroke glow
(engine mounts inverted)

Muffler: Standard sport scale muffler.
Radio: at least 4 channel, 8 channel radio with digital servos is
highly recommended
Servos: 8 standard size;
Ailerons: Two 50+ oz-in ball bearing (FUTM0075)
Flaps: Two 50+ oz-in ball bearing (FUTM0075)
Rudder: One 90 oz-in high torque (HCAM0191)
Elevator: Two 90 oz-in ball bearing (HCAM0191)
Throttle: One, standard torque (HCAM0149)
20" Servo Extension: Two, for ailerons (FUTM4147)
8" Servo Extension: Two each for ailerons and flaps (FUTM4140)
40" Servo Extension: One for rudder (FUTM4148)
Note: if using computerized radio with ailevator programming
two 40" extensions are needed, if using non-computerized radio,
servo reversing harness (FUTM4150) and 20" extension (FUTM4147) are
required.
Misc. Items: Glow plug, ½" foam rubber padding, medium fuel tubing,
fuel filter, propeller (IMPORTANT-do not use a propeller with a
pitch higher than 8), building and field equipment

SPECS: Wingspan: 82" (2085mm)
Wing Area: 1772 sq in (114sq dm)
Weight: 12.5 - 13.5lb (5.6 - 6.1kg)
Wing Loading: 16.1 - 17.4 oz/sq ft (49 - 53 g/sq dm)
Airfoil: Fully symmetrical
Length: 84" (2135mm)
Distance from spinner backplate to firewall: 6" (152mm)
Center of Gravity: 6¼" (160mm) Back from the wing's leading edge
Control Throws- High Rate (3D) Low Rate
Elevator: Up & Down 5" (130mm) 1¾" (45mm)
Rudder: Right to Left 6" (150mm) 4" (101.6mm)
Ailerons: Up & Down 2¾" (70mm) 1¼" (32mm)
Flaps: 4" (101.6mm) full 2¾" (70mm) half

COMMENTS: Following are the Top Flite MonoKote colors used on this model and
order numbers for 6ft rolls;
Jet White (TOPQ0204) Sky Blue (TOPQ0206)
Medium Purple (TOPQ0225) Pink (TOPQ0215)
For gas conversion stopper use: SULQ2684