MAMBA MONSTER 25V V3+ 2650

CSE6202

This is the Mamba Monster Monster Truck and Extreme 1/8 scale
Brushless Power System from Castle Creations.

FEATURES: Motor: Neu-Castle 2650 KV motor designed for 1/8 scale Buggy
applications (see COMMENTS)
Intended for 4S (16.8 Volt) operation
Standard Neo rotor on a 5mm shaft
High end bearings for trouble free operation
Machined integrated cooling fins
4 pole, slotted, brushless motors wound 1 turn in a Y
configuration
ESC: Designed for extreme 1/8 scale monster truck applications
Profiles can be custom designed on a PC with the included
Castle Link
Infinitely adjustable throttle and brake curves with timing
advance
Punch Control allows dialing in horsepower where needed
Brake Strength allows straight tracking under hard braking
Drag Brake helps entry into corners
Start Power for smooth launches
Programmable cutoff voltage for LiPo usage
On/Off switch
Universal receiver connector

INCLUDES: 2650kv Neu/Castle motor
18T Pinion gear
Mamba monster version 3 speed control
Castle Link hardware

REQUIRES: Installing into vehicle

SPECS: Motor: Length: 67.78mm (2.67")
Diameter: 39.98mm(1.57"), 41.78mm (1.6") with fins
Weight: 121g (0.27lb)
Shaft Diameter: 5mm (.2")
Max Input Volts: 16.8V
Amp Rating: 120
Wire Lead Guage: 10 ga

ESC: 6 cell LiPo
Continuous: N/A
Resistance: .0003 Ohm
Brake: Proportional with adjustable curve
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 2.2 x 1.9 x 1.4" (56 x 48 x 35mm)
Weight: 4.3oz (121g)
Connector Type: 6.5mm

COMMENTS: Use 2200Kv motor for Monster Truck and 1/8 scale Truggy Applications