MINI SUPER SPORTSTER EP ARF

GPMA1156

Almost Ready-to-Fly
Great Planes Mini Super Sportster EP Sport Airplane.
For Intermediate Modeler/Fliers who have safely
flown and landed a high wing trainer.

FEATURES: Construction: Easy interlocking balsa and plywood, with built-in
thrust angles. Pre-built and pre-covered in heat shrink covering
Wings: Built-up, one-piece, pre-covered
Motor: 400 size with preassembled 2.4:1 ball bearing gear drive,
prop adapter and 10x4.5 propeller
Covering: Heat shrink type color scheme is White with Purple, Orange
and Red accents (logo decal sheet included for added decoration)
Radio Compartment: Plywood reinforced, easily accessible under wing
Cowling: Lightweight ABS plastic, White in color
Canopy: Single, tinted and hinged to allow easy access to battery
Landing Gear: Pre-formed wire with 1.75" (44mm) diameter foam wheels
Wheel Pants: Painted fiberglass, White in color
Aileron Control: Single servo, full strip ailerons offer basic
aerobatic potential for loops, rolls, spins and more
Tail skid: Pre-covered plywood construction (no tailwheel)
Hardware: Included
Building Time: Ready to fly in 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at date
of purchase.

INCLUDES: Pre-built and covered wing, fuselage and tail, pushrods, prebent
wire main landing gear, 1.75" foam wheels, hardware package, ABS
plastic cowling, fiberglass wheel pants, tinted canopy, decals,
10x4.5" prop, 400 size motor with 2.4:1 gear box, and instructions

REQUIRES: Radio: 4 channel
Servos: 3 micro FUTM0025
Electronic Speed Control: At least 12A
Servo Extension: One 6" (152mm) HCAM2701
Battery: 9.6V 1100mAh battery GPMP0251
Charger: GPMM3005
Misc. Items: Building and field equipment

SPECS: Wingspan: 39.5" (1005mm)
Wing Area: 276 sq in (17.8 sq dm)
Weight: 22-24oz (624-680g)
Wing Loading: 11-13 oz/sq ft (33.6-39.7 g/sq dm)
Length: 30.3" (770mm)
Airfoil: Semi-Symmetrical
Center of Gravity: 2-3/16" (56mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down 1/8" (3mm) ¼" (6.35mm)
Elevator: Up & Down 3/16" (5mm) 5/16" (8mm)
Rudder: Left & right ¾" (19mm) 1" (25.4mm)

COMMENTS: Page 3 of the manual incorrectly states that a BEC type connector is
included to attach to the battery wires on your speed control
to work with the required battery. This part is not included
with the model. Order GPMM3107 for this BEC plug.