VOLTWATCH - 12V FIELD POWER

HCAP0331

This is the Hobbico VoltWatch Battery Monitor for
12V Field Batteries

FEATURES: A quick way to check Field Battery levels
Mounts on outside of Field Box with included double sided tape
Push button operation. POWER button must be pushed to activate LEDs
Red, Amber, and Green LEDs glow to show voltage range from 11-13V
Red = 11V or less
First Amber = 11-11.4V
Second Amber = 11.4-11.7V
First Green = 11.7-12.1V
Second Green = 12.1-12.4V
Third Green = 12.4-12.8V
Final Green = 12.8-13.0V
Draws amazingly low current - less than 30mA
Wires are pre-stripped and tinned for easy soldering to battery*
Two year warranty
INCLUDES: One VoltWatch Battery Monitor for 12V Field Batteries
One 1x1.5" piece of double-sided servo tape

REQUIRES: Soldering leads to battery terminals*
Attaching to Field Box with double-sided servo tape

SPECS: Length: 1.6" (41mm)
Width: .6" (15.6mm)
Height: .13" (3mm)
Weight: .35oz (10g)
Current Draw: less than 30mA
Battery lead wire length: 9.5" (241mm) approximately

COMMENTS: Important! Unit may fail if input leads are connected in reverse and
the button is pushed. Be certain to observe proper polarity when
plugging in leads.
*Instructions suggest soldering directly to the battery terminals.