">

Alumilite Corp . ALU Alumilite Clear Slow 2lb

Article number:
ALU10041
Availability:
In stock
C$46.99
Excl. tax

Its low viscosity and 1:1 mix ratio by weight makes it extremely easy to use. It offers superior polishability than other clear resins and able to achieve maximum shine in your finished parts. Alumilte Clear Properties High Impact High Gloss Optically Clear Casting Can be Dyed or Pigmented 15 Minute Open Time Mix 1:1 by Weight Notes Vacuum or pressure is recommended to achieve 100% bubble free castings but minimal bubbles can be achieved by slowly mixing and pouring the resin. Off ratio mixing may produce hazy or frosted parts. Recommended for industrial use only. B side may thicken and need to be warmed before use.

Alumilite Clear Slow is a crystal-clear resin with a longer (twelve-minute) open time, making it convenient to use for large casting and turning projects.

  • High impact
  • Convenient 1:1 mix ratio (by weight)
  • Thin viscocity for easy mixing
  • Easily dyed or pigmented
  • Can be turned, drilled, sanded, and polished to high gloss
  • Off-mixing may produce hazy or frosted parts
  • Minimal bubbles can be achieved by slowly mixing and pouring
  • Pressure casting is recommended for bubble-free results
  •  

Note: The clarity of resin will shift from batch to batch based on the clarity of incoming raw materials. In most cases, this will not affect product unless used over white backgrounds.

0 stars based on 0 reviews Add your review