Team BlackSheep . TBS BetaFPV X-Knight 4 Toothpick w/CRSF

X-Knight 4'' FPV Toothpick Quad - The lightweight 4 inch toothpick.
Availability:
In stock
C$299.99
Excl. tax

Have you heard the new rule of Remote ID from the FAA (Federal Aviation Administration)? Are you worried about your 4in and 5in drone? This lightweight X-Knight 4'' Quad is only 130g, which is below 250g even with the battery, and it is still powerful enough as the 5in drone. Make your flight easier without limitation.

This lightweight 4-inch toothpick is below 250g even if you connect with the battery, meet the current requested of FAA rules.
Assembled 4'' frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g.
The first carbon fiber series installs Betafpv Toothpick 20A 2-4S AIO flight controller, which can supports up to 25A continuous currents.
Integrates with 1505 3600KV motor, X-Knight offers unparalleled execution in thrust and control.
Supports up to 850mAh 4S battery. It has plenty of power and punches to do all the tricks and flips you want.

Specifications:

Weight: 129.6g (without battery)
FC&ESC:20A Toothpick F4 2-4S AIO FC V3.0
Motors: 1505 3600KV Brushless Motors
Props: HQ 4025 2-Blade Props
Battery: 850mAh 4S battery
Camera: Caddx Ratel Camera
VTX: A01 25-200mW 5.8G VTX
Frame: X-Knight Carbon Fiber 4'' Frame Kit
Canopy: Canopy for Mini Camera V3
Receiver: TBS Crossfire
Flight time: 3:30-7:30mins with XT60 4S battery

Flight Controller:

Toothpick F4 2-4S 20A AIO FC V3.0- The first quadcopter installs all-in-one 20A Toothpick FC, which can handle 20A continuous current(25A burst) and provide with massive levels of performance capability while still maintain ultralight only 6.63g. Possesses a high-performance STM32F411CEU6 processor and tuned BETAFPVF411(BEFH), which provides much more power on 4S.

Motors:

1505 3600kv motor hits the nice spot for high-powered 4s 4'' toothpick builds with the ability to swing up to 4" props with ease. Combined with 20A Toothpick F4 AIO FC, which will provide you enough output power.

Camera & VTX:

The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.


Specifications of Camera

Image Sensor: 1/1.8" Inch starlight HDR sensor
Horizontal Resolution: 1200TVL
FOV: 180 Degree
Min. Latency: 8ms
TV System: NTSC & PAL (changeable)
Image: 16:9 & 4:3 (changeable)
WDR: Super WDR (HDR)
Min. Illumination: Starlight
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Camera OSD: Separate OSD
DNR: 3-DNR

Specifications of VTX:

A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

Output power: 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Frequency: 5.8GHz 6 bands 37 channels

0 stars based on 0 reviews Add your review