Arrows Hobby F 86 Sabre 64mm PNP

Article number:
ARWH024PVEC
Availability:
In stock
C$369.99
Excl. tax

F-86 Sabre 64mm EDF PNP with Vector Flight Stabilization System

The North American F-86 Sabre was the first US fighter aircraft designed using the German research that showed a 35 degree thin swept wing gave superior transonic performance. The Sabre was the equal of its well-known Korean War opponent, the Mig-15. It was the highest production US jet fighter ever made, with total production of 9860 units. It was manufactured in many variants, and the Navy FJ fighter was a modified version suited for carrier operations. It was the first fighter equipped with air-to-air missiles, and later versions were supersonic in a dive. All in all, it is a classic.

While Arrows has introduced a number of EDF jets, from the hand tossed Viper to the high-end MiG-29 and F-15, our engineering team began with the Marlin 64mm EDF, still the best EDF trainer made. The F-86 is the successor to the Marlin with fixed gear for strength and the same full 5-channel performance with flaps. The plane has excellent performance and agility at high speed and stability during landings.

The smooth 12-blade 64mm fan sounds more realistic than older 5-blade 64mm units others use. Because of the more powerful 2840-3150KV motor and a 40 amp ESC, this plane is capable of top performance even though it is larger than other 64mm F-86's, with maneuvers such as rolling, diving, looping, and inverted flight. The quick release landing gear allow for fast transition from ground take-off to hand lauch and facilitates easy transport.

The EPO foam is tough and at 820mm length and 860mm wingspan, it is a perfect 1/10 scale of the original full-scale plane. The contours, panel lines, and markings are highly accurate and realistic. The special water-based paint has a very realistic look. Assembly is fast and simple using only a few screws.

Get ready for a new experience in EDF's with the Arrows 64mm F-86 Sabre. 

Features

  • 12-bladed 64mm EDF, 2840-3150KV motor, 40A ESC, 9g servos
  • Highly realistic scale components: panel lines, functional flaps, dual drop tanks
  • Steerable nose gear for enhanced ground maneuverability
  • High-quality rubber tires
  • Preinstalled ball-linked linkages for precise surface movements
  • Carbon reinforced airframe
  • Fantastic low-speed performance and aerobatic capabilities 
  • Needed to Complete

    This is a PNP RC plane and requires a radio system, battery, and charger to be complete.

     

    Specifications

    Wing Area: 15.2dm² (235in²)
    Wing Loading: 69g/dm² (0.15oz/in²)
    Wingspan: 860mm (33.8in)
    Length: 820mm (32.3in)
    CG (Center of Gravity): 130-140mm from the leading edge
    Power System: 2840-KV3150
    Electronic Speed Control: 40A (XT60)
    Servos: 9g servo x 8
    Landing Gear: Fixed
    Required Battery: 4S 2200-2600mAh 35C XT60 Connector
    Required Radio: Minimum 5 Channel transmitter and receiver required
    Ailerons: Yes
    Elevator: Yes
    Rudder: Yes
    Flaps: Yes
    Material: EPO Foam
    Gyro: Vector

0 stars based on 0 reviews Add your review