Arrows Hobby, after the success of trainers, warbirds, and jets, now brings you gliders. This first glider, the 2000mm SZD-54, has been thoroughly tested, and has been brought to you in it's best form.
To achieve the best dihedral, the SZD-54 was designed with a specialized two-piece CNC threaded metal spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines. Additionally, the pre-embedded carbon fiber spars in the fuselage and main wings ensure overall rigidity in high-G maneuvers.
A high-quality 30A ESC paired with a 3136-KV1000 motor provides ample power with a 3S pack (1300mAh-2200mAh) to perform most aerobatic maneuvers. Positive and negative loops, stall turns, point rolls, and inverted flight can be easily and excellently performed.
The wing and horizontal stabilizers are designed with a snap-fit structure, which can be installed by pressing and detached by pulling. No screws or glue necessary! This superb design makes transportation and storage easy. With the majority of the aircraft pre-assembled and no need for screws or glue, this aircraft can be built in as little as 3 minutes!
| Wingspan: | 2000mm (78.7in) |
| Length: | 1096mm (43.1in) |
| CG (Center of Gravity): | 45-60mm from leading edge |
| Power System: | Brushless 3136-KV1000 |
| Electronic Speed Control: | 30A |
| Servos: | 9g plastic servos x 6 |
| Landing Gear: | Belly landing wheel |
| Required Battery: | 3S 1300mAh-2200mAh |
| Required Radio: | 6 Channel transmitter and receiver required |
| Ailerons: | Yes |
| Elevator: | Yes |
| Rudder: | Yes |
| Flaps: | Yes |
| Skill Level: | Intermediate |
